Impregnant For
Buildings 10L

Is a means for rectifying the following deficiencies: damp walls, corrosion, frost damage, dirt, lime and salt and heat rash.
Can be applied on bricks, pavers, sandstone, concrete, gas concrete, natural stone, asbestos and roof tiles.
Is a colorless, water-repellent silicone resin, dissolved in hydrocarbons.
The treated surface is protected from UV-rays.
Contains no paint film and hence the breathing of the walls is not affected.
Has a great penetrating power and excellent chemical resistance. Fixes up wolde asbestos fibers.
Delivered ready for use.
Causes no color change to the treated surface.
The term of protection is at least 5 years.
Rectifying the following deficiencies: damp walls, corrosion, frost damage, dirt, lime and salt and heat rash.
Is a colorless, water-repellent silicone resin.
A clean, dry surface is required, since in the capillaries is to be active.
Undiluted and generously applied with a brush, sponge, roller, or pressure injection.
It is advisable to apply the product twice to obtain a satisfactory impregnation.
The drying time and moisture-resistant effect can be achieved even after 4-6 hours.
Maximum results after 24 hours at normal temperatures.
In the application of multiple layers is applied wet-on-wet, ie the time lapse between the layers has to be only 15-30 minutes.
Typical values consumtion:
* cement plaster - 0.3 l / m2 * brick - incl add 0.5 l / m2 * clinker - incl joints - 0.2 l / m2 * of cellular concrete 0.8 l / m2.
PH/.